Express 4500 V8-6.0L (2010)
1. Apply the proper axle lubricant to the surface of each disc. Refer to Adhesives, Fluids, Lubricants, and Sealers (See: Fluid -
Differential/Specifications/Fluid Type Specifications).
2. Assemble the left side clutch disc assembly as follows:
1. Install the 1st non-carbon eared disc (2) to the side gear (1).
2. Install the 1st splined disc (3).
3. Install the 2nd non-carbon eared disc (4).
4. Install the 2nd splined disc (5).
5. Install the 3rd non-carbon eared disc (7).
6. Align the ears of all the clutch discs.
7. Install the guide clips (6) to the clutch discs (2-5, 7).
Apply the proper chassis grease to the guide clips in order to hold the clips in place on the disc ears. Refer to Adhesives, Fluids, Lubricants,
and Sealers (See: Fluid - Differential/Specifications/Fluid Type Specifications).