Express 4500 V8-6.0L (2010)
13. Using a brass drift and a hammer, remove the inner hub bearing cup.
14. Remove the retaining ring from the wheel hub.
15. Using the J 24426 - installer (2) and the J 8092 - handle (1), remove the outer hub bearing and bearing cup.
Installation Procedure
1. Lubricate the following with a light coat of high melting point EP bearing lubricant:
*
The outer wheel bearing
*
The inner wheel bearing
*
The outer wheel bearing cup
*
The inner wheel bearing cup
*
The axle hub spindle
