Express 4500 V8-6.0L (2010)
1. Install the spacer (if applicable) onto the rear of the crankshaft.
2. Install the automatic transmission engine flywheel to the crankshaft.
Note: Longer flywheel bolts must be used on applications using a flywheel spacer.
3. Apply threadlock to the threads of the flywheel bolts. Refer to Adhesives, Fluids, Lubricants, and Sealers (See: Engine, Cooling and
Exhaust/Engine/Specifications/Adhesives, Fluids, Lubricants, and Sealers) for the correct part number.
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
4. Install the engine flywheel bolts.
1. Tighten the engine flywheel bolts a first pass in sequence to 20 Nm (15 lb ft).