Express 4500 V8-6.6L DSL Turbo (2009)
Coolant Reservoir: Service and Repair
Radiator Vent Inlet Hose Replacement
Radiator Vent Inlet Hose Replacement
Removal Procedure
1. Drain the coolant from the reservoir. Refer to Cooling System Draining and Filling (Static Fill) (See: Service and Repair)Cooling System
Draining and Filling (Vac N Fill) (See: Service and Repair).
2. Remove the coolant recovery reservoir. Refer to Coolant Recovery Reservoir Replacement (See: ).
3. Remove the vent hose from the throttle body.
4. Remove the vent hose from the radiator.
5. Remove the vent hose (1) from the vehicle.
Installation Procedure