chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Campaign - A/T Valve Body Inspection/Replacement|Page 3420 > < Campaign - A/T Valve Body Inspection/Replacement|Page 3418
Page 3
background image

TRANSMISSION VALVE BODY REPLACEMENT

5.

IF SLEEVE IS NOT PRESENT, valve body replacement is required. Contact your Zone Office with a complete list of truck VIN's inspected with
the corresponding transmission identification numbers. Your Zone Office will make arrangement to ship transmission valve bodies and gaskets
required to you at no charge. Five quarts of Dexron II transmission fluid, P/N 1051855, is required for each truck repaired, to be procured locally.
Instructions for removal and replacement of the valve body are contained in the 1984 Passenger Car and Light Duty Truck Service Manual.

6.

Stamp the letter "V" next to the transmission identification number.

Dealers must verify that supplied valve body year and model number corresponds to transmission identification number of truck before installing.
Do not order valve bodies from WDDGM. Install a campaign completion label and release vehicle.

CLAIM INFORMATION

Submit a Product Campaign Claim with the information indicated below:

Parts

Failed

Parts

Failure

Labor

Labor

*Other

Count

Part No.

Allowance

Code

Operation

Hours

Hours

00

V2290

.2

.1

DESCRIPTION:

Inspect transmission for involved I.D. number according to the instructions outlined. No further action required.

Parts

Failed

Parts

Failure

Labor

Labor

*Other

Count

Part No.

Allowance

Code

Operation

Hours

Hours

6

8642360

12.65

00

V2291

.7

.1

DESCRIPTION:

Inspect transmission for involved I.D. number, R & R transmission oil pan, inspect valve body according to the instructions
outlined. No further action required.

CLAIM INFORMATION (CONT'D)

Parts

Failed

Parts

Failure

Labor

Labor

*Other

Count

Part No.

Allowance

Code

Operation

Hours

Hours

7

8647437

53.36

00

V2292

1.2

.1

DESCRIPTION:

Inspect, replace valve body and new valve body gasket.

IMPORTANT:

Valve bodies replaced must be held by the dealer for physical scrapping by a Chevrolet representative.

*Campaign Administrative Allowance.

Dealers will automatically receive the correct labor and material allowance based on the labor operation performed. The (12.65) identified in the "parts
allowance" column of V2291 represents 5 quarts of transmission fluid and gasket. Labor operation V2292, "parts allowance" represents 5 quarts of fluid,
valve body and valve body gasket.

Refer to the Chevrolet Claims Processing Manual for details on Product Campaign Claim submission.

Campaign Identification Label

CAMPAIGN IDENTIFICATION LABEL

Each vehicle modified in accordance with the instructions outlined in this Product Campaign Letter will require a "Campaign Identification Label". Each
label provides a space to include the five digit dealer code of the dealer performing the campaign service. This information may be inserted with a

Campaign - A/T Valve Body Inspection/Replacement|Page 3420 > < Campaign - A/T Valve Body Inspection/Replacement|Page 3418