G 10 Van V6-262 4.3L VIN Z (1992)
![background image](/chevrolet/g_10_van/v6-262_4.3l_vin_z/Page-1298001.png)
Pinion Bearing: Adjustments
Corporate and Eaton
7 1/2 - 8 7/8 Inch Ring Gear
Fig. 16 Pinion depth gauge tool installation. Models w/7-1/2 inch ring gear
Fig. 17 Pinion depth gauge tool installation. Models w/8-1/2 & 8-7/8 inch ring gear
PINION DEPTH ADJUSTMENT
If original ring gear and pinion assembly and rear pinion bearing are to be reused, original depth adjusting shim can be used. However, if
ring gear and pinion or rear pinion bearing are replaced, pinion depth must be adjusted using following procedures.
1.
Install pinion bearing races to be used in housing using suitable driver.
2.
Lubricate pinion bearings and install bearings in races.
3.
Mount depth gauging jig in housing noting the following.
Use gauge assembly J-23597-01 for models with 7-1/2 inch ring gear, J-21777-01