G 10 Van V8-305 5.0L (1987)
Timing Chain: Service and Repair
Installation
Engine Timing Components
Aligning Timing Marks
Install or Connect
CAUTION: When fasteners are removed, always reinstall them at the same location from which they were removed. If a fastener needs to be
replaced, use the correct part number fastener for that application. If the correct part number fastener is not available, a fastener of equal size and
strength (or stronger) may be used. The correct torque value must be used when installing fasteners that require it. If the above conditions are not met,
parts or system damage could result.
1. Install Timing chain (58) with the camshaft sprocket (101) on the camshaft.
2. Ensure that the timing marks on the crankshaft sprocket (59) and camshaft sprocket (101) are as close together as possible and lined up with the
shaft centers.