chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Sensors and Switches > < Glow Plug - No Cold Start Capability
Page 1
background image

Glow Plug Controller: All Technical Service Bulletins
Glow Plug - No Cold Start Capability

Number:

89-264-6

Section:

6

Date:

September 1989

Corporate Bulletin No.: 936519

Subject:
NO COLD START CAPABILITY

Model and Year:
1985-89 C, K, R, V, G, P TRUCKS WITH 6.2L (VIN CODE J AND C) ENGINES

TO:

ALL CHEVROLET DEALERS

THIS BULLETIN CANCELS AND SUPERSEDES DEALER SERVICE BULLETIN NO. 89-248-6, DATED DECEMBER 1988. DIAGNOSTIC
PROCEDURES HAVE BEEN REFERENCED, AS WELL AS A CHANGE MADE IN THE SECOND PARAGRAPH. ALL COPIES OF 89-248-6
SHOULD BE DISCARDED.

Some 1985-89 C, K, R, V, G and P-trucks with a 6.2L diesel engine may experience a "no start" condition when cold.

The electronic glow plug controller, P/N 12052153 (color coded black), may be responsible for a no start condition.

If a no start condition exists, refer to the diagnostic procedure listed in Dealer Service Bulletin # 88-49, dated October 1987. Should a new glow plug
controller be required, based on your diagnosis, the following controller should be used.

The new controller, P/N 12088520 (color coded grey), is being released with improved circuit board components to address no start difficulty.

Part is currently available from GMSPO.

Use applicable labor operation number and time.

Sensors and Switches > < Glow Plug - No Cold Start Capability