chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Front Doors|Page 11292 > < Front Doors|Page 11290
Page 2
background image

Install or Connect

1. Press the lock cylinder into the handle to engage the lock cylinder retainer.
2. Clip retaining the lock cylinder lever to the lock cylinder.
3. Outside handle
4. Side front door trim panel

Front Door Lock

Remove or Disconnect

1. Door trim panel.
2. Lock rods from the lock.
3. Electrical connectors from the lock.
4. Screws retaining the lock to the door.
5. Lock from the door.

Install or Connect

1. Lock to the door.
2. Screws retaining the lock to the door.

^

Tighten Screws to 11 Nm (89 lb. in.)

3. Electrical connectors to the lock.
4. Lock rods to the lock.
5. Door trim panel.

Front Doors|Page 11292 > < Front Doors|Page 11290