G 1500 1/2 Ton Van V6-4.3L VIN W (1997)
Brake Fluid Pressure Sensor/Switch: Service and Repair
Brake Booster Fluid Flow Alarm Switch
REMOVE OR DISCONNECT
1. The electrical connector from the fluid flow alarm switch.
2. The hose clamps from the fluid flow alarm switch.
CAUTION: Do not force a thick blade wrench on the flow switch or damage will result. Use a thin blade open-end wrench.
3. The fluid flow alarm switch from the vehicle.
INSTALL OR CONNECT
1. The fluid flow alarm switch to the vehicle.
2. The hose clamps from the fluid flow alarm switch.
^
Tighten the clamp to the fluid flow alarm switch to 3 Nm (27 inch lbs.).
3. The electrical connector from the fluid flow alarm switch.