chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Heater Hose > < Air Inlet Case, Primary Heating System|Page 10417
Page 2
background image

9. The heater lines from the underside of the auxiliary heater.

10. The retaining nuts from the underside of the auxiliary heater.
11. The auxiliary heater from the vehicle.

Install or Connect

1. The auxiliary heater to the vehicle.
2. The retaining nuts to the underside of the auxiliary heater.

Tighten

^

The auxiliary heater retaining nuts to 10 N.m (89 lb. in.).

3. The heater lines to the underside of the auxiliary heater.
4. The heater lines to the underside of the auxiliary heater, if equipped.

Tighten

^

The heater line retaining nut to 25 N.m (18 lb. ft.).

5. The heater and heater line cover to the underside to the auxiliary heater.
6. The electrical connectors to the auxiliary heater.
7. The heater to floor vent duct.
8. The heater to roof duct from the auxiliary heater.
9. The rear quarter panels.

10. Recharge the refrigerant.
11. Fill the engine coolant.

Heater Hose > < Air Inlet Case, Primary Heating System|Page 10417