G 1500 1/2 Ton Van V6-4.3L VIN W (1997)
1. The rubber insulators to the stabilizer shaft.
-
Be sure the bushings are placed on the stabilizer shaft with slits facing toward the front of the vehicle.
2. The stabilizer shaft.
3. The brackets over the bushings and the stabilizer shaft.
4. The bolts to the brackets and the frame.
-
Tighten the stabilizer shaft bracket bolts to 35 Nm (26 ft. lbs.).
5. The spacer assemblies.
6. The link bolt assemblies.
7. The nuts.
-
Tighten
-
Until the nut meets the end of the bolt threads for torque value.
-
Nut to 18 Nm (13 ft. lbs.).
8. Lower the vehicle.
