G 20 Van V8-379 6.2L DSL (1987)
8667668
Identification B Refer to Figure 12
8667669
Identification C Refer to Figure 12
8667670
Identification D Refer to Figure 12
8667671
Identification E Refer to Figure 12
8667661
Input Housing and Shaft Assembly (621) (used with 245 mm converter)
8667659
Input Housing and Shaft Assembly (621) (used with 298 mm converter)
8667660
Input Housing and Shaft Assembly (621) (used with 298 converter MHM model only)
PROCEDURE FOR SELECTION OF THE FORWARD CLUTCH BACKING PLATE (Figure 12)
1.
With the overrun clutch and the forward clutches fully assembled in the input housing and shaft assembly, use feeler gauges to measure the
backing plate travel.
2.
Proper forward clutch backing plate travel should be .75 mm (.030") to 1.60 mm (.063").
3.
Select the proper forward clutch backing plate (Figure 12) to obtain the specified travel.