G 2500 3/4 Ton Van V8-6.5L DSL Turbo VIN F (1997)
Front Engine Plate: Service and Repair
REMOVAL
CAUTION: Perform TDC Offset Recovery procedure if the timing chain, timing gears, engine front cover, crankshaft position sensor, crankshaft or
other components affecting the timing are replaced.
1. Drain the cooling system.
2. Remove the water pump.
3. Rotate the engine until the timing marks are aligned.
4. Remove the crankshaft balancer.
5. Remove the crankshaft position sensor.
6. Remove the engine front cover to oil pan bolts.
NOTE: Mark the fuel line clips, so that they can be re-installed on the proper stud.
7. Remove the fuel return line clips.
8. Remove the front cover for the fuel injection pump drive gear.
9. Remove the fuel injection pump gear.
10. Remove the fuel injection pump retaining nuts.
11. Remove the engine front cover and bolts.