G 2500 3/4 Ton Van V8-6.5L DSL Turbo VIN F (1997)
Fuel Filter: Service and Repair
Fuel Filter Replacement
REMOVAL PROCEDURE
1. Remove the fuel tank filler cap.
2. Remove the protective shield.
3. Open the air bleed valve on the top of the fuel manager/filter in order to release any of the pressure in the fuel supply system.
4. Disconnect the wiring harnesses and the fuel lines.
5. Remove the mounting bolts which attach the fuel manager/filter to the frame.
6. Remove the fuel manager/filter.
INSTALLATION PROCEDURE
1. Connect the fuel lines and the wiring harnesses to the assembly.
2. Install the fuel manager/filter to the frame.
Tighten
-
Tighten the mounting bolts to 25 Nm (18 lb ft).