chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Deployed Inflator Module|Page 8117 > < Deployed Inflator Module|Page 8115
Page 8
background image

Figure 21

Figure 20

Important

Firmly seat the pigtail adapter into the inflatable restraint steering wheel module connector. Failure to fully seat the connectors may result in
nondeployment of the inflator module.

18. Connect the inflatable restraint steering wheel module (1) to the pigtail adapter (2) on the SIR Deployment Harness (3) (Figure 22).

^

The deployment harness shall remain shorted until you are ready to deploy the air bag.

^

Do not connect the SIR Deployment Harness to a power source until you are ready to deploy the air bag.

^

The inflator module will immediately deploy when you connect the power source.

19. Clear the area of all people and loose or flammable objects (Figure 20).

Figure 22

20. Make sure that you place the inflatable restraint steering wheel module with its vinyl trim cover facing up.
21. Notify all people in the immediate area before you deploy the inflatable restraint steering wheel module.

^

An inflatable restraint steering wheel module deployment is very loud.

^

The deployment may startle any uninformed people in the area.

22. Separate the two banana plugs on the SIR Deployment Harness (Figure 23).

CAUTION: When you are deploying an inflator module for disposal, perform the deployment procedures in the order listed:

Deployed Inflator Module|Page 8117 > < Deployed Inflator Module|Page 8115