G 2500 3/4 Ton Van V8-6.5L DSL Turbo VIN F (1997)
Oil Pressure Switch (For Fuel Pump): Service and Repair
REMOVAL PROCEDURE
1. Remove the Fuel Filter/Manger. Go to Fuel Manager/Filter Replacement.
2. Disconnect the electrical connector.
3. Remove the switch using J 35748.
INSTALLATION PROCEDURE
1. Install the Fuel Filter/Manger. Go to Fuel Manager/Filter Replacement.
2. Install the switch.
3. Connect the electrical connector.
4. Bleed the fuel system. Refer to Bleeding Air from Fuel Supply System. See: Powertrain Management/Fuel Delivery and Air Induction/Service
and Repair
