G 2500 3/4 Ton Van V8-6.5L DSL Turbo VIN F (1997)
Brake Transmission Shift Interlock: Description and Operation
The Brake Transmission Shift Interlock requires that the brake pedal be depressed before the automatic transmission may be shifted from Park position.
Once the transmission is placed in Park, and the Ignition Switch is in RUN or START, current flows from TURN B/U Fuse 16 through the contacts of
the Park/Neutral Position Switch (closed-in-Park), through the TCC/Stoplamp Switch, and through the A/T Shift Lock Solenoid to Ground G201. The
solenoid is energized preventing the transmission from being placed in another gear. When the brake pedal is depressed, the normally-closed contacts in
the TCC/Stoplamp Switch open. Current flow is stopped and the A/T Shift Lock Solenoid is de-energized. The transmission may be placed in another
gear. Once the transmission is in any other gear, the contacts in the Park/Neutral Position Switch are open and no current can flow to energize the
solenoid when the brake pedal is released.
