G 2500 3/4 Ton Van V8-6.5L DSL Turbo VIN F (1997)
-
Hook one of the ends of the retainer spring into one of the quick connector slots.
-
Rotate the retainer into position and ensure all three "Ears" are visible on the inside of the connector and the ring can move id the slots freely.
-
Repeat the above procedures for installation of the remaining retaining ring.
NOTICE: Ensure the cooler line has the plastic cap positioned onto the cooler line. If no plastic cap exist, obtain a NEW plastic cap and
position it onto the cooler line prior to cooler line installation.
