G 2500 3/4 Ton Van V8-6.5L DSL Turbo VIN F (1997)
1. Torque converter cover attaching bolts.
2. Torque converter to the flywheel bolts.
3. Rotate the torque converter 1/3 turn.
INSTALL OR CONNECT
1. Torque converter to the flywheel bolts.
-
Tighten bolts to 63 Nm (46 ft. lbs.).
2. Torque converter cover bolts.
-
Tighten torque converter cover bolts to 33 Nm (24 ft. lbs.).
3. Start the engine and check for vibration. Repeat the procedure until the best possible balance is obtained.
