G 30 Van V8-379 6.2L DSL VIN C FI (1992)
-
Cap the lines and the pump fittings immediately
-
Tag the lines for installation
INSTALL OR CONNECT:
1. Injection lines at the pump
-
Uncap the lines and pump fittings
-
Refer to the tags for correct installation
2. Injection lines at the nozzles
-
Uncap the lines and nozzles
-
Tighten fittings to 25 Nm (20 ft lbs)
3. Injection line clips at the loom brackets
4. Intake manifold
-
Remove J29664-1
5. Injection line clips
6. Tighten intake manifold bolts to 40 Nm (30 ft lbs)
7. Crankcase ventilator bracket
8. Air cleaner assembly
9. Negative battery cables