chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

All Technical Service Bulletins for Control Arm:|93C51 > < Recall 94V125000: Control Arm Defect
Page 1
background image

Control Arm: All Technical Service Bulletins
Recall - Lower Control Arm Cracks

Number: 93-C-51(a)

Section: 3C

Date:

Subject:
PRODUCT SAFETY CAMPAIGN 93-C-51(a) - LOWER CONTROL ARM CRACKING

- - - SUPPLEMENT - - -

Model and Year: 
1992-93 G30 VANS WITH 9200 LB. GVWR

To: All Chevrolet Dealers

THIS BULLETIN SUPPLEMENTS 93-C-51 ISSUED AUGUST, 1994. THE SERVICE PROCEDURE AND CLAIMS INFORMATION SECTIONS
HAVE BEEN REVISED SPECIFICALLY, AN INSPECTION HAS BEEN ADDED AND THE CORRESPONDING LABOR OPERATION. THE
CORRECTED INFORMATION IS REPRINTED BELOW.

SERVICE PROCEDURE

INSPECTION PROCEDURE

1.

Inspect both sides of vehicle for new style lower control arms that incorporate a support plate on the outside of the arm.

2.

If vehicle DOES NOT have the support plate, it requires the reinforcement installation, proceed to the INITIAL POSITIONING OF
REINFORCEMENT section of the service procedure.

3.

If vehicle DOES have the support plate it will not require reinforcement installation, install campaign Identification Label.

CLAIM INFORMATION

Submit a Product Campaign Claim with the information indicated.

Dealers will automatically receive the correct labor and material allowance based on the labor operation performed.

Refer to the Chevrolet Claims Processing Manual for details on Product Campaign Claim Submission.

All Technical Service Bulletins for Control Arm:|93C51 > < Recall 94V125000: Control Arm Defect