G 30 Van V8-6.5L DSL Turbo VIN F (1996)
Turbo Boost Sensor: Service and Repair
Boost Sensor
Other than checking for loose electrical connections, the only service possible is unit replacement if diagnosis shows sensor to be faulty.
REMOVE OR DISCONNECT
1. Negative battery cable.
2. Electrical Connector.
3. Mounting Bolts.
4. Remove the sensor.
INSTALL OR CONNECT
1. Install the port gasket on the sensor.
2. Install the sensor
3. Install mounting bolts.
Tighten
-
Bolts 3.5 Nm (27 lb. in.).
4. Install the electrical connector.
5. Connect the negative battery cable.
