chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

ABOUT US
Turbo Hydra-Matic 4L60-E Automatic Transaxle|Page 5234 > < A/T - 4L80-E 2nd Gear only After A Cold Start/DTC 87|Page 5229

G 30 Van V8-6.5L DSL Turbo VIN F (1996)

Page 1
background image

Seals and Gaskets: Service and Repair
Turbo Hydra-Matic 4L60-E Automatic Transaxle

1. Remove driveshaft, and tunnel strap, if equipped.
2. Using suitable tool, pry out lip oil seal.
3. Coat outer casting of new oil seal with suitable sealer and drive into place with seal installer tool No. J-21426 or equivalent.
4. Install tunnel strap if used, then install driveshaft.

Turbo Hydra-Matic 4L60-E Automatic Transaxle|Page 5234 > < A/T - 4L80-E 2nd Gear only After A Cold Start/DTC 87|Page 5229