HHR L4-2.0L Turbo (2010)
Fluid Pressure Sensor/Switch: Service and Repair
Transmission Fluid Pressure Manual Valve Position Switch Replacement
Removal Procedure
1. Remove the transmission side cover. Refer to Control Valve Body Cover Replacement (See: Automatic Transmission/Transaxle/Valve
Body/Service and Repair/Control Valve Body Cover Replacement).
2. Remove the six bolts from the transmission fluid pressure (TFP) switch assembly.
3. Remove the TFP switch assembly from the control valve body assembly (18). The 4 pressure switch O-rings are reusable and should remain with
the TFP switch assembly.
Installation Procedure
1. Install the TFP switch assembly to the control valve body assembly (18). The 4 pressure switch O-rings are reusable and should remain with the
TFP switch assembly.
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
