HHR L4-2.2L (2007)
Brake Pedal Assy: Service and Repair
Brake Pedal Assembly Replacement (Automatic Transaxle)
Brake Pedal Assembly Replacement (Automatic Transaxle)
Important: A new brake pedal assembly includes a disposable switch adjustment shim on the stop lamp switch contact area. Use this shim for
switch adjustment as instructed, then remove and discard the shims.
Removal Procedure
1. Remove the instrument panel (I/P) sound insulator.
2. Remove the brake booster pushrod retaining clip (1) and bushing (2).
3. Loosen the 4 brake booster mounting nuts (3).
4. Release the brake booster pushrod (4) from the brake pedal pivot pin.
5. Remove the 4 brake booster mounting nuts.