HHR L4-2.4L (2010)
2. Install the sunroof motor/actuator screws and tighten to 6 Nm (53 lb in).
3. Connect the electrical connector.
4. Verify the sunroof operation.
5. Initialization /Teach the sunroof motor. Refer to Sunroof Motor/Actuator Initialization/Teach Process (See: Testing and Inspection).
6. Install the headliner. Refer to Headlining Trim Panel Replacement (See: Interior Moulding / Trim/Headliner/Service and Repair).
7. Refer to Programming and Relearning (See: Testing and Inspection/Programming and Relearning) for programming and setup information.