HHR L4-2.4L (2010)
Wheel Cylinder: Service and Repair
Rear Brake Cylinder Replacement
Removal Procedure
Warning: Refer to Brake Dust Warning (See: Service Precautions/Technician Safety Information/Brake Dust Warning).
Warning: Refer to Brake Fluid Irritant Warning (See: Service Precautions/Technician Safety Information/Brake Fluid Irritant Warning).
1. Remove the brake drum. Refer to Brake Drum Replacement (See: Brake Drum/Service and Repair/Removal and Replacement).
2. Clean the area surrounding the wheel cylinder of dirt and debris.
3. Disconnect the wheel cylinder brake pipe fitting (1).
Cap the brake pipe fitting to prevent brake fluid loss and contamination.
4. Remove the wheel cylinder bolts (1).
