HHR L4-2.4L (2010)
13. Wait 15 seconds, then repeat steps 11-12 until a firm brake pedal is obtained. This will properly seat the brake caliper pistons and brake pads.
14. Adjust the park brake cable tension. Refer to Parking Brake Adjustment (Drum) (See: Parking Brake System/Adjustments/Parking Brake
Adjustment (Drum))Parking Brake Adjustment (Disc) (See: Parking Brake System/Adjustments/Parking Brake Adjustment (Disc)).
15. Install the console rear trim plate. Refer to Console Rear Trim Plate Replacement (See: Body and Frame/Interior Moulding /
Trim/Console/Service and Repair/Console Rear Trim Plate Replacement).
Front Brake Caliper Hardware Replacement
Front Brake Caliper Hardware Replacement
Warning: Refer to Brake Dust Warning (See: Service Precautions/Technician Safety Information/Brake Dust Warning).
Removal Procedure
1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle (See: Maintenance/Vehicle Lifting/Service and Repair).
2. Remove the tire and wheel assembly. Refer to Tire and Wheel Removal and Installation (See: Maintenance/Wheels and Tires/Service and Repair
).
3. Install and firmly hand tighten 2 wheel nuts to opposite wheel studs in order to retain the rotor to the hub.
4. Remove the brake caliper guide pin bolts (1).
Caution: Support the brake caliper with heavy mechanic wire, or equivalent, whenever it is separated from its mount and the hydraulic flexible
brake hose is still connected. Failure to support the caliper in this manner will cause the flexible brake hose to bear the weight of the caliper, which
may cause damage to the brake hose and in turn may cause a brake fluid leak.
5. Remove the brake caliper and support with heavy mechanics wire or equivalent.
