HHR L4-2.4L (2010)
7. Remove the brake hose fitting bolt (1) from the brake caliper.
8. Remove the copper brake hose gaskets (2) from the brake hose (3).
Discard the copper brake hose gaskets.
9. Cap or plug the opening in the brake caliper and the brake hose (3) to prevent fluid loss and contamination.
Installation Procedure
1. Remove the caps or plugs from the opening in the brake caliper and the brake hose.
Note: Install NEW copper brake hose gaskets (2).
2. Assemble the brake hose fitting bolt (1) and the copper brake hose gaskets (2) to the brake hose (3).
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
3. Install the brake hose assembly to the brake caliper.