HHR L4-2.4L (2010)
Connecting Rod: Specifications
ROD BEARING CAP TORQUE AND SEQUENCE
Connecting Rod Bolt
First Pass.........................................................................................................................................................................................................25 Nm (18 lb ft)
Final Pass...............................................................................................................................................................................................................100 degrees
CONNECTING ROD SIDE CLEARANCE, OUT-OF-ROUND & DIAMETER
Connecting Rod Side Clearance......................................................................................................................................0.070-0.370 mm (0.0028-0.0146 in)
Connecting Rod Journal Diameter...............................................................................................................................49.000-49.014 mm (1.9291-1.9297 in)
Connecting Rod Bore Diameter - Bearing End..........................................................................................................52.118-52.134 mm (2.0519-2.05252 in)
Connecting Rod Bore Diameter - Pin End...................................................................................................................20.007-20.017 mm (0.7877-0.7881 in)
Connecting Rod Straightness - Bend - Maximum..................................................................................................................................0.021 mm (0.0083 in)
Connecting Rod Straightness - Twist - Maximum....................................................................................................................................0.04 mm (0.0157 in)
