HHR L4-2.4L (2010)
10. Remove the EN 45680-881 fixture and EN 45680-883 cylinder bore sleeve installer assembly (1) from the cylinder block (2).
Cylinder Liner Trimming
*
EN 45680-885 Debris Collector (3)
*
EN 45680-881 Trim Tool Assembly (2)
*
Air Control Valve (1)
*
Drill Motor with 1/2 inch chuck, 1 1/8 hp, 7 amps, triple gear reduction, and a 450-600 RPM rotational speed in a clockwise direction
