HHR L4-2.4L (2010)
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
1. Install the camshaft cover and bolts.
Tighten the bolts to 10 Nm (89 lb in).
2. Install the ignition coils. Refer to Ignition Coil Replacement (See: Powertrain Management/Ignition System/Ignition Coil/Service and Repair).
3. Install the engine harness clips (1,2 ) to the cover.
