HHR L4-2.4L (2010)
1. Lubricate the solenoid valve O-ring seals with clean engine oil.
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
2. Install the intake (2) CMP actuator solenoid valve and bolt, as required.
Tighten the bolt to 10 Nm (89 lb in).
3. Install the exhaust (1) CMP actuator solenoid valve and bolt, as required.
Tighten the bolt to 10 Nm (89 lb in).
4. Connect the intake (3) or exhaust (2) camshaft position actuator solenoid valve electrical connector, as required.
5. Install the air cleaner assembly. Refer to Air Cleaner Assembly Replacement (See: Tune-up and Engine Performance Checks/Air Cleaner
Housing/Service and Repair).
