HHR L4-2.4L (2010)
Fuel Pressure: Testing and Inspection
Fuel Pressure Gauge Installation and Removal
Fuel Pressure Gauge Installation and Removal
Special Tools
CH-48027 Digital Pressure Gage
Installation Procedure
Warning: Refer to Gasoline/Gasoline Vapors Warning (See: Powertrain Management/Fuel Delivery and Air Induction/Fuel/Service Precautions).
Warning: Refer to Relieving Fuel Pressure Warning (See: Service Precautions).
1. Relieve the fuel system pressure. Refer to Fuel Pressure Relief (With CH 48027) (See: Fuel Filter/Fuel Pressure Release/Service and Repair/Fuel
Pressure Relief (With CH 48027))Fuel Pressure Relief (Without CH 48027) (See: Fuel Filter/Fuel Pressure Release/Service and Repair/Fuel
Pressure Relief (Without CH 48027)).
2. Connect the CH-48027-1 (1) to the CH-48027-2 (2).
3. Remove the shop towel from around the fuel rail service port, and place in an approved gasoline container.
4. Perform any tests and/or diagnostics as needed. For the proper usage of the CH-48027 , refer to the manufacture's directions.
Removal Procedure
