HHR L4-2.4L (2010)
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
3. Install the park brake indicator switch screw (2).
Tighten the screw to 3 Nm (27 lb in).
4. Connect the park brake indicator switch electrical connector (1).
5. Install the console rear trim plate. Refer to Console Rear Trim Plate Replacement (See: Body and Frame/Interior Moulding /
Trim/Console/Service and Repair/Console Rear Trim Plate Replacement).
6. Verify correct park brake indicator lamp operation.