HHR L4-2.4L (2010)
Alignment: Service and Repair
Wheel Alignment - Steering Wheel Angle and/or Front Toe Adjustment
Wheel Alignment - Steering Wheel Angle and/or Front Toe Adjustment
1. Ensure that the steering wheel is set in a straight ahead position.
2. Loosen the tie rod jam nut (5).
3. Adjust the toe to specification by turning the inner tie rod (6). Refer to Wheel Alignment Specifications (See: Specifications/Wheel Alignment
Specifications).
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
4. Tighten the tie rod jam nut (5).
Tighten the tie rod jam nut (5) to 68 Nm (50 lb ft).
