HHR L4-2.4L (2010)
Fluid - M/T: Testing and Inspection
Transmission Fluid Level and Condition Check
1. Remove the left front wheel. Refer to Tire and Wheel Removal and Installation (See: Wheels and Tires/Service and Repair).
Note: Inspect the fluid level only when the engine is off. Ensure the vehicle is level. The transaxle must be cold.
2. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle (See: Vehicle Lifting/Service and Repair).
3. Remove the level check plug.
4. Verify that the fluid is up to the opening.
5. If no fluid is visible, add fluid until the level check opening begins to leak fluid. Refer to Lubrication Specifications (See: Specifications/Fluid
Type Specifications) for fluid recommendations.
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
6. Install the fluid level check plug.
Tighten the fluid level check plug to 38 Nm (28 lb ft).
7. Install the left front wheel. Refer to Tire and Wheel Removal and Installation (See: Wheels and Tires/Service and Repair).