HHR L4-2.4L (2010)
Coupler/Service and Repair/Plastic Collar Quick Connect Fitting Service).
6. Cap or plug the EVAP pipe in order to prevent contamination.
7. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle (See: Maintenance/Vehicle Lifting/Service and Repair).
8. Remove the evaporative emission (EVAP) canister, if necessary. Refer to Evaporative Emission Canister Replacement (See: Emission Control
Systems/Evaporative Emissions System/Evaporative Emission Control Canister/Service and Repair).
9. Disconnect the fuel feed pipe quick connect fitting. Refer to Plastic Collar Quick Connect Fitting Service (See: Fuel Line Coupler/Service and
Repair/Plastic Collar Quick Connect Fitting Service).
10. Remove the brake lines from the fuel/EVAP/brake line brackets.
11. Remove the fuel/EVAP/brake line bracket nuts and remove the brackets from the body studs.
12. Remove the fuel and EVAP lines from the vehicle.
13. Open the brackets and remove the fuel feed pipe.
Installation Procedure
1. Install the fuel feed pipe to the brackets and close the covers.
2. Install the fuel and EVAP lines to the vehicle.
