HHR L4-2.4L (2010)
1. Place the TCM (2) into the under hood junction block bracket (3).
2. Install the TCM electrical harness connector to the TCM.
3. Install the cover on the ECM and TCM.
4. Connect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection (See: Starting and Charging/Battery/Battery
Cable/Negative/Service and Repair/Battery Negative Cable Disconnection and Connection).
5. Program the TCM. Refer to Programming and Relearning (See: Testing and Inspection/Programming and Relearning) for programming and setup
information.