HHR L4-2.4L (2010)
Note: Only move the tire enough to feel any lash between the inner tie rod and the inner tie rod housing without moving the steering gear rack.
6. Grasping the tire at the 3 o'clock (2) and 9 o'clock (1) positions, gently push in on one side of the tire in order to remove any lash.
7. Zero the J-8001 - Dial Indicator.
8. On the same side of the tire previously pushed in, gently pull out and measure the lash.
9. Record the measurement seen on the J-8001 - Dial Indicator.
10. If the measured value exceeds 0.5 mm (0.02 in), replace the steering gear. Refer to Steering Gear Replacement (LE8 and LE9) (See: Steering
Gear)Steering Gear Replacement (LNF) (See: Steering Gear).
11. Repeat the procedure for the other side.