HHR L4-2.4L (2010)
Valve Body: Service and Repair
Control Valve Body Cover Replacement
Control Valve Body Cover Replacement
Special Tools
J 36850 Transjel Lubricant(TM)
Removal Procedure
1. With the wheels in the straight ahead position, remove the key from the ignition switch.
2. Remove the underhood electrical center cover.
3. Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection (See: Starting and
Charging/Battery/Battery Cable/Negative/Service and Repair/Battery Negative Cable Disconnection and Connection).
4. Disconnect the engine control module harness connector (3, 4).
5. Disconnect the positive battery cables (1) from the under hood electrical center.