HHR L4-2.4L (2010)
Constant Velocity Joint Boot: Service and Repair
Wheel Drive Shaft Outer Joint and Boot Replacement
Wheel Drive Shaft Outer Joint and Boot Replacement
Special Tools
*
CH 48894 - Wheel Drive Shaft Boot Clamp Pliers
*
J 35910 - Drive Axle Seal Clamp Pliers
Disassemble Procedure
Note: The outer constant velocity (CV) joint is not serviced separately. If the CV joint is found to have excessive wear or damage, replace the
wheel drive shaft as an assembly.
1. Clamp the drive axle shaft in a soft-jawed vice.