HHR L4-2.4L (2010)
Fluid - M/T: Service and Repair
M86 - Manual Transmission
Transmission Fluid Replacement
Draining Procedure
1. Remove the left front wheel. Refer to Tire and Wheel Removal and Installation (See: Maintenance/Wheels and Tires/Service and Repair).
2. Raise and suitably support the vehicle. Refer to Lifting and Jacking the Vehicle (See: Maintenance/Vehicle Lifting/Service and Repair).
3. Clean away all dirt and debris from the transmission fluid drain plug area.
4. Remove the drain plug.
5. Allow the system to drain.
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
6. Install the transmission fluid drain plug, using pipe sealant on the plug threads.
Tighten the transmission fluid drain plug to 38 Nm (28 lb ft).
Filling Procedure