HHR L4-2.4L (2010)
9. Connect the surge tank inlet hose to the surge tank.
10. Install the positive battery cables (1) to the underhood electrical center and tighten the positive cable nut to 15 Nm (11 lb ft).
11. Connect the engine control module harness connectors (3, 4).
12. Connect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection (See: Starting and Charging/Battery/Battery
Cable/Negative/Service and Repair/Battery Negative Cable Disconnection and Connection).
13. Install the underhood electrical center cover.