HHR L4-2.4L (2010)
Note: The glass primer black number 2 is effective up to 8 hours after applying it to the glass. The primed surface of the glass must be kept clean.
14. Shake the glass primer black number 2 for at least 1 minute.
15. Use a new dauber in order to apply the glass primer black number 2 to the same areas (2) that glass prep clear number 1 was applied.
16. Allow the glass primer to dry for approximately 10 minutes.
17. Cut the applicator nozzle in order to provide a bead of 12.7 mm (1/2 in) wide and 12.7 mm (1/2 in) high.
18. Use a cartridge-type caulking gun in order to apply a smooth, continuous bead of urethane adhesive.
19. Use the edge of the window as a guide for the nozzle in order to apply the urethane adhesive (1) to the inner surface of the window (3).
