Impala V6-3.4L VIN E (2000)
4. Install the circle retainers to the ends of the grille.
5. Install the push-in retainers to the upper grille.
6. Install the upper radiator air baffle. Refer to Radiator Air Baffle Assemblies and Deflectors (Upper) Radiator Air Baffle Assemblies and
Deflectors (Side) Radiator Air Baffle Assemblies and Deflectors (Lower) in Engine Cooling.
7. Close the hood.
Front Bumper Fascia Replacement
Front Bumper Fascia Replacement (Impala)
Tools Required
J 38778 Door Trim Pad Clip Remover
Removal Procedure
1. Remove the front fender liners. Refer to Front Fender Liner Replacement (See: Fender/Front Fender/Front Fender Liner/Service and Repair) in
Body Front End.
2. Remove the headlamps. Refer to Headlamp Assembly or Headlamp Bulb and/or Cornering, Sidemarker, Park, Turn Signal Bulb Replacement
(Impala) Headlamp Assembly or Headlamp Bulb and/or Cornering, Sidemarker, Park, Turn Signal Bulb Replacement (Monte Carlo) in
Lighting Systems.
3. Remove the fog lamps, if equipped. Refer to Front Fog Lamp Replacement (Impala) Front Fog Lamp Replacement (Monte Carlo) in Lighting
Systems.
4. Remove the nuts from the front bumper fascia at the fender.