Impala V6-3.8L SC VIN 1 (2005)
Amplifier: Service and Repair
AMPLIFIER REPLACEMENT
REMOVAL PROCEDURE
1. Remove the rear window trim panel.
2. Disengage the amplifier retainers from the rear window panel.
IMPORTANT: Inspect the retainers and the foam washers. Faulty retainers and washers must be replaced.
3. Disconnect the electrical connectors from the amplifier.
4. Remove the amplifier.
INSTALLATION PROCEDURE
1. Position the amplifier to the rear window panel.
2. Align the retainers to the openings in the rear window panel. Carefully push in the retainers in order to secure the amplifier.
IMPORTANT: Make sure all of the foam washers are installed.
Faulty retainers must be replaced.
3. Connect the electrical connectors to the amplifier.
4. Install the rear window trim panel.