Impala V6-3.8L SC VIN 1 (2005)
5. Use firm hand pressure in order to fasten the hook and the loop retainers, securing the rear seat cushion cover to the pad.
6. Align the alignment marks on the rear seat cushion cover to the alignment marks on the pad, on the back side.
7. Install the hog rings to the rear seat cushion cover.
8. Install the rear seat cushion.
Seat Cushion Retainer Replacement - Rear
Seat Cushion Retainer Replacement - Rear
Removal Procedure
1. Remove the rear seat cushion.
2. Use a flat-bladed tool to release the retainers from the floor.
Slide the tool under the front edge and pry up.
Installation Procedure