Impala V6-3.8L SC VIN 1 (2005)
Air Duct: Service and Repair
AIR DISTRIBUTION DUCT REPLACEMENT
REMOVAL PROCEDURE
1. Remove the I/P lower trim panel.
2. Remove the retaining screw (1) from the air distribution duct.
3. Remove the retaining bolts from the air distribution duct.
4. Remove the air distribution duct from the cross vehicle beam.
5. Reposition the right I/P fuse junction block.
6. Remove the retaining bolts from the right air distribution duct.
7. Remove the right air distribution duct from the cross vehicle beam.
INSTALLATION PROCEDURE
1. Install the right air distribution duct to the cross vehicle beam.
2. Install the right air distribution duct bolts.
NOTE: Refer to Fastener Notice in Service Precautions.
Tighten the bolts to 10 N.m (89 lb in).
3. Install the right I/P fuse junction block.